STIHL FS 560 C-EM Brushcutter

£1,320.00 (inc. VAT) *online price only

This product will enter our FREE PDI (Pre-Delivery Inspection) process

Top of the range 2-MIX STIHL FS 560 C-EM Brushcutter with M-Tronic (M) and ErgoStart (E)

Clear

Top of the range with extraordinary power and robust design. The STIHL FS 560 C-EM Brushcutter / clearing saw with STIHL M-Tronic and ErgoStart is a sound choice for professionals. Low vibration levels due to the four-point anti-vibration system. With simple start logic, stop button and fully electronic M-Tronic engine management as standard.

STIHL 2 years warranty and click and collect

Total length cm 1)176
Weight kg 2)10.2
Sound pressure level with plastic tool dB(A) 3)101
Sound pressure level with metal tool dB(A) 3)104
Sound power level dB(A) 3)117
Sound power level with metal tool dB(A) 3)117
Performance kW2.8
Weight Pounds 2)22.5
Vibration value, right with metal tool m/s2 3)3.3
Vibration value, left with metal tool m/s2 4)3.3
Capacity cu-in3.48
Vibration value, left with plastic tool m/s2 4)3.7
Vibration value, right with plastic tool m/s2 4)3.7
Performance PS3.8
Fuel tank capacity oz33.5
Capacity cm357.1
Speed at maximum power Um9500
Tank volume l0.99
Cutting toolCircular saw blade
Performance Um2500
Cutting diameter mm480
Displacement cm³57.1
Power output kW/bhp2,8/3,8
Weight kg 5)10.2
Standard cutting toolCircular saw blade 225-24
  • 1) Without cutting tool
  • 2) Without fuel, cutting tool and without protection
  • 3) K-factor according to DIR 2006/42/EC = 2.5 dB (A)
  • 4) K-factor according to DIR 2006/42/EC = 2m / s ²
  • 5) without cutting tool and deflector

Additional information

Reduced-emission engine technology

2-stroke engine with stratified charge. A fuel-free layer of air is created between the burned charge in the combustion chamber and the fresh charge in the crankcase, reducing the amount of fuel lost during the charge cycle. This results in more power with a lower weight, up to 20% lower fuel consumption than regular 2-stroke engines and significantly reduced exhaust emissions.

Large fuel tank

The transparent fuel tank with a volume of 0.75 l ensures long working intervals with fewer fuel stops. The level is easily visible from the outside. Easy to refuel through a large, easily accessible tank opening.

Air filter with long service life

The easily accessible paper filter with a long service life means it can go for long intervals without changing.

Winter setting slide control

It is quick and easy to switch the setting from winter to summer using the slide control. Using the winter setting will prevent the air filter and carburettor from freezing.

Manual fuel pump (Purger)

A small fuel pump delivers fuel to the carburettor at the touch of a button. This reduces the number of starting strokes required following extended breaks in operations.

Start flap lever (M-Tronic)

With the M-Tronic, you do not have to worry about cold or warm start. With M-Tronic there is only one starting position on the start flap lever. The system detects cold or warm start automatically and electronically calculates the exact amount of fuel. You can start with fewer starting strokes and can apply full throttle immediately. If you press the throttle trigger the start rotary switch will automatically return to the operating position.

STIHL M-Tronic

This fully electronic engine management system adjusts ignition timing and fuel metering in all operating modes. It also takes external conditions such as temperature, altitude and fuel quality into account. It ensures consistent engine performance, a constant maximum speed and superb acceleration. M-Tronic makes manual carburettor adjustments unnecessary. Thanks to electronic cold/warm start recognition, now there is only one start position on the combi-lever. The engine starts after fewer pulls and with no change of position, and can immediately accelerate up to speed – even after a cold start. M-Tronic also remembers the settings from the last time the tool was used. So when external conditions are the same, optimal engine performance is available every time you start up again.

STIHL ErgoStart (E)

STIHL ErgoStart cuts the effort required to start the tool by half, while the starter cord can be pulled at just one third of the normal force. A coil spring between the starter cord and the crankshaft smoothes out force peaks, making them virtually undetectable through the cord itself.

Simplified starting system

Simply set the choke, pump the fuel primer, pull the starter cord and away you go! The running machine then switches off after a brief press of the stop button. Once the machine is at a standstill, the ignition activates again automatically. Thus the ignition is always ready for starting.

Bike handle

When used in conjunction with a harness, the bike handle enables a smooth mowing action. The bike handle allows the machine to be easily guided, making it ideal for working on large areas and thus reducing fatigue.

STIHL 4-point anti-vibration system

In STIHL brushcutters, steel springs act as anti-vibration elements to reduce the transmission of vibrations caused by the motor and rotary cutter. The handles therefore have extremely low vibration and the devices is easy to guide.

ADVANCE forestry harness

Great freedom of movement thanks to the freely suspended leg protection. Extremely ergonomic for forestry applications involving circular saw blades. Very light. Tool bag also available.

Locking plug-in bolt

Changing the tool is made particularly easy by locking the plug-in bolt in place.

Multi-function control handle

Easy, comfortable thumb-operated control means the operator's hand never leaves the handle.

Compensator

This controller in the carburettor prevents the fuel-air mixture getting richer as the air filter becomes clogged. The correct quantity of fuel is delivered to the carburettor depending on the quantity of air passing through the air filter. This keeps the fuel/air ratio in the combustion mixture constant and hence also the engine power. The filter doesn't need to be cleaned until an appreciable drop in power occurs.

Tool free handle adjustment

The central wing nut enables easy adjustment without the use of tools. For transportation and space-saving storage, the handle can be rotated by 90°.

Warranty

Cardiff Lawn and Garden STIHL warranty periods

STIHL warranty periods are as follows:

Domestic Use
All STIHL Products shown in the current STIHL Sales Catalogue is covered for a period of 2 years from the date of purchase to the ORIGINAL PURCHASER, when used for the designed purpose of that product by Domestic users.

Professional Use
All STIHL Products shown in the current STIHL Sales Catalogue are covered for a period of 1 year from the date of purchase to the ORIGINAL PURCHASER, when used for the designated purpose of that product by semi-professional and professional users (including Hire, Rental and Construction Industry).

STIHL Pressure Washers – 3 Year warranty for domestic use
All STIHL high pressure cleaners offer a one year extension to the standard STIHL warranty terms. Therefore, when purchasing a model from our range, all domestic users will receive a 3 year warranty (2+1), while semi-professional and professional users are entitled to a 2 year warranty (1+1).

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.